C-56 IM02601001E www.eaton.com
Modbus Register Maps
7D01 - 7D01 32002 - 32002 Relay #1 Delay to Operate UINT16 0.1 second units Delay to operate the
relay since request.
1
7D02 - 7D02 32003 - 32003 Relay #1 Delay to Release UINT16 0.1 second units
Delay to release the
relay since request.
1
7D03 - 7D08 32004 - 32009 Reserved UINT16
Set to 0. 6
7D09 - 7D09 32010 - 32010 Relay #2 Delay to Operate UINT16 0.1 second units
Delay to operate the
relay since request.
1
7D0A - 7D0A 32011 - 32011 Relay #2 Delay to Release UINT16 0.1 second units
Delay to release the
relay since request.
1
7D0B - 7D20 32012 - 32033 Reserved UINT16
Set to 0. 22
7D21 - 7D21 32034 - 32034 Input Accumulators Scaling UINT16 bit-mapped -------- 22221111 * 4 bits per accumulator
* 0xF disables the ac-
cumulation
* 0-5 = power of
divisor for the scaled
accumulator
Example: count=12456,
4bits=3:
divisor=103=1000 &
scaled accumulator=12.
1
7D22 - 7D22 32035 - 32035 Relay Accumulators Scaling UINT16 bit-mapped -------- 22221111 1
7D23 - 7D3E 32036 - 32063 Reserved
Set to 0. 28
Block Size: 63
Settings Registers for Digital I/O Pulse Output Card First Overlay write only in PS update
mode
7D00
-
7D00 32001
-
32001 Input#1 - 4 bindings & logging enables UINT16 bit-mapped 44443333 22221111 One nibble for each of
the 4 inputs.
Assuming "-bcc" as the
bits in each nibble:
"b": Log this input when
pulse is detected
"cc": Input event trigger
mode - Contact sensing
method; 00 = none; 01
= open to close; 10 =
close to open; 11 = any
change.
1
To Next Page
Loading...
