www.eaton.com IM02601001E C-57
Modbus Register Maps
7D01 - 7D01 32002 - 32002 Source for Pulse Ouput#1 UINT16 enumeration -----ppp ----vvvv "ppp" (Phase) : 000
= none, 001 = Phase
A, 010 = Phase B,
011 = Phase C, 100
= All Phases, 101 =
Pulse from EOI(End Of
Interval).
"vvvv"(Value) :
0000= none,
0001 = Wh,
0010 = +Wh,
0011 = -Wh,
0100= Varh,
0101 = +Varh,
0110 = -Varh,
0111 = VAh,
1000= Received Wh,
1001= Delivered Wh,
1010= Inductive Varh,
1011 = Capacitive Varh
1
7D02 - 7D02 32003 - 32003 Kt [Wh/pulse] factor for Pulse Output#1 UINT16 bit-mapped ddVVVVVV VVVVVVVV "V…V" = not scaled
energy value per pulse,
from 0 to 9999.
"dd"= decimal point
position: 00=0.XXXX,
01=X.XXX, 10=XX.XX,
11= X.XXX.
1
7D03 - 7D04 32004 - 32005 Output#2 Assignment and Kt UINT16 Same as Output #1. 2
7D05 - 7D06 32006 - 32007 Output#3 Assignment and Kt UINT16 Same as Output #1. 2
7D07 - 7D08 32008 - 32009 Output#4 Assignment and Kt UINT16 Same as Output #1. 2
7D09 - 7D09 32010 - 32010 Input Accumulators Scaling UINT16 bit-mapped 44443333 22221111 See Relay Card above. 1
7D0A - 7D0A 32011 - 32011 Output Accumulators Scaling UINT16 bit-mapped 44443333 22221111 1
7D0B - 7D3E 32012 - 32063 Reserved
Set to 0. 52
Block Size: 63
Settings Registers for Digital I/O Relay Card Second Overlay write only in PS update
mode
7D3F
-
7D46 32064
-
32071 Input#1 Label ASCII 16 char 8
7D47 - 7D4E 32072 - 32079 Input#1 Low State Name ASCII 16 char
8
7D4F - 7D56 32080 - 32087 Input#1 High State Name ASCII 16 char
8
7D57 - 7D6E 32088 - 32111 Input#2 Label and State Names Same as Input #1. 24
7D6F - 7D9E 32112 - 32159 Reserved
Set to 0. 48
7D9F - 7DA6 32160 - 32167 Relay#1 Label ASCII 16 char
8
7DA7 - 7DAE 32168 - 32175 Relay#1 Open State Name ASCII 16 char
8
7DAF - 7DB6 32176 - 32183 Relay#1 Closed State Name ASCII 16 char
8
7DB7 - 7DCE 32184 - 32207 Relay#2 Label and State Names Same as Relay #1. 24
To Next Page
Loading...
