Eaton Pow-R-Line SPX0361126 - Page 230

C-58 IM02601001E www.eaton.com Modbus Register Maps
7DCF - 7DFE 32208 - 32255 Reserved Set to 0. 48
7DFF - 7E06 32256 - 32263 Input#1 Accumulator Label ASCII 16 char
8
7E07 - 7E0E 32264 - 32271 Input#2 Accumulator Label ASCII 16 char
8
7E0F - 7E1E 32272 - 32287 Reserved
Set to 0. 16
7E1F - 7E1F 32288 - 32288 Input#1 Accumulator Kt UINT16 bit-mapped ddVVVVVV VVVVVVVV KT power factor for the
Pulse Output. "V" is raw power value in Wh/pulse from 0 to 9999. "dd"=decimal point position: 00=0. XXXX, 01=X.XXX, 10=XX.XX, 11= X.XXX.
1
7E20 - 7E20 32289 - 32289 Input#2 Accumulator Kt UINT16 bit-mapped ddVVVVVV VVVVVVVV 1
7E21 - 7F3E 32290 - 32575 Reserved
Set to 0. 286
Block Size: 512
Settings Registers for Digital I/O Pulse Output Card
Second Overlay write only in PS update
mode
7D3F
-
7D46 32064
-
32071 Input#1 Label ASCII 16 char 8
7D47 - 7D4E 32072 - 32079 Input#1 Low State Name ASCII 16 char
8
7D4F - 7D56 32080 - 32087 Input#1 High State Name ASCII 16 char
8
7D57 - 7D6E 32088 - 32111 Input#2 Label and State Names Same as Input #1. 24
7D6F - 7D86 32112 - 32135 Input#3 Label and State Names Same as Input #1. 24
7D87 - 7D9E 32136 - 32159 Input#4 Label and State Names Same as Input #1. 24
7D9F - 7DA6 32160 - 32167 Output#1 Label ASCII 16 char
8
7DA7 - 7DAE 32168 - 32175 Output#1 Open State Name ASCII 16 char
8
7DAF - 7DB6 32176 - 32183 Output#1 Closed State Name ASCII 16 char
8
7DB7 - 7DCE 32184 - 32207 Output#2 Label and State Names Same as Output #1. 24
7DCF - 7DE6 32208 - 32231 Output#3 Label and State Names Same as Output #1. 24
7DE7 - 7DFE 32232 - 32255 Output#4 Label and State Names Same as Output #1. 24
7DFF - 7E06 32256 - 32263 Input#1 Accumulator Label ASCII 16 char
8
7E07 - 7E0E 32264 - 32271 Input#2 Accumulator Label ASCII 16 char
8
7E0F - 7E16 32272 - 32279 Input#3 Accumulator Label ASCII 16 char
8
7E17 - 7E1E 32280 - 32287 Input#4 Accumulator Label ASCII 16 char
8
7E1F - 7E1F 32288 - 32288 Input#1 Accumulator Kt UINT16 bit-mapped ddVVVVVV VVVVVVVV KT power factor for the
accumulator input. "V" is raw power value in Wh/pulse from 0 to 9999. "dd"=decimal point position: 00=0. XXXX, 01=X.XXX, 10=XX.XX, 11= X.XXX.
1
7E20 - 7E20 32289 - 32289 Input#2 Accumulator Kt UINT16 bit-mapped ddVVVVVV VVVVVVVV 1
7E21 - 7E21 32290 - 32290 Input#3 Accumulator Kt UINT16 bit-mapped ddVVVVVV VVVVVVVV 1
7E22 - 7E22 32291 - 32291 Input#4 Accumulator Kt UINT16 bit-mapped ddVVVVVV VVVVVVVV 1
7E23 - 7F3E 32292 - 32575 Reserved
Set to 0. 284
Block Size: 512