EasyManua.ls Logo

Eaton Power Xpert 9395P - Page 164

Eaton Power Xpert 9395P
239 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Eaton Power Xpert 9395 UPS Installation and Operation Manual 164201764—Rev 14 143
Table 32. Typical System Status Messages
UPS Message
UPS Shutdown; Bypass; Online; Online with ESS; Online +VMMS; High Alert
Bypass Off; On; Available
Maintenance Bypass Off; On
Charger Charger Off; Charging
UPM (during startup) DC Starting, Charger Off; DC Starting, Close Battery Breaker; Inverter Starting; Inverter
Syncing; Ready; Online
UPM 1
UPM 4 (if FI-UPM is installed)
Offline; Shutdown, Charger Off; Ready; Ready, Charging; Online, Charger Off; Online,
Charging
Table 33. Command Menu Operation
Function Sub-function Operation
UPS Control
Commands
Use the up or down arrow pushbutton to highlight the
command function desired, then press the SELECT
pushbutton to execute the command or proceed to further
command screens.
Go to Online Starts the UPS in Online mode or transfers the UPS to Online
mode from Bypass mode.
Enable (Disable) Energy Saver Enables or disables Energy Saver System mode. Enable
changes to Disable when the Energy Saver System mode is
enabled.
Enable (Disable) Var Module Management
Enables or disables the Variable Module Management
System mode. Enable changes to Disable when the Variable
Module Management System mode is enabled.
Start High Alert Starts High Alert mode.
Go to Bypass Starts the UPS in Bypass mode or transfers the UPS to
Bypass mode from Online mode.
Load Off
Displays the Load Off screen (see paragraph
7.2.7 Load Off Screen).
Bypass
Commands
Use the up or down arrow pushbutton to highlight the
command function desired, then press the SELECT
pushbutton to execute the command or proceed to further
command screens.
Go to Bypass Starts the UPS in Bypass mode or transfers the UPS to
Bypass mode from Online mode.
Go to Online Starts the UPS in Online mode or transfers the UPS to Online
mode from Bypass mode.
Enable (Disable) Energy Saver Enables or disables Energy Saver System mode. Enable
changes to Disable when the Energy Saver System mode is
enabled.
UPS Operating Instructions

Table of Contents

Other manuals for Eaton Power Xpert 9395P

Related product manuals