Eaton Power Xpert C445 - Page 287

Appendix C—Optional Communication Cards
Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com 273
Instance Attributes
Sr. No. Attribute ID Access Data Type Attribute Name Attribute Description
6 6 (0x6) Get USINT Line Voltage Phase Order Supply frequency in centi-Hz
7 7 (0x7) Get/Set UINT PT Ratio (only available with
external PT) - Primary
PT Ratio (only available with external PT) - Primary
8 8 (0x8) Get UINT Line Frequency - Scaled Line Frequency - Scaled
9 9 (0x9) Get/Set UINT PT Ratio (only available with
external PT) - Secondary
PT Ratio (only available with external PT) - Secondary
10 10 (0xA) Get UINT Measurement Module Voltage
Scale Factor
Measurement Module Voltage Scale Factor
11 11 (0xB) Get/Set USINT Protection UnderVoltage Trip
Level
Protection UnderVoltage Trip Level
12 12 (0xC) Get/Set UINT Protection UnderVoltage Trip
Debounce
Protection UnderVoltage Trip Debounce
13 13 (0xD) Get/Set USINT Protection UnderVoltage Alarm
Level
Protection UnderVoltage Alarm Level
14 14 (0xE) Get/Set UINT Protection UnderVoltage Start
Delay
Protection UnderVoltage Start Delay
15 15 (0xF) Get/Set UINT Protection OverVoltage Trip Level Protection OverVoltage Trip Level
16 16 (0x10) Get/Set UINT Protection OverVoltage Trip
Debounce
Protection OverVoltage Trip Debounce
17 17 (0x11) Get/Set UINT Protection OverVoltage Alarm
Level
Protection OverVoltage Alarm Level
18 18 (0x12) Get/Set USINT Protection V Unbalance Trip
Percent Level
Protection V Unbalance Trip Percent Level
19 19 (0x13) Get/Set UINT Protection V Unbalance Trip
Debounce Time
Protection V Unbalance Trip Debounce Time
20 20 (0x14) Get/Set USINT Protection V Unbalance Alarm
Percent Level
Protection V Unbalance Alarm Percent Level
21 21 (0x15) Get USINT V Phase Loss Trip Level in percent V Phase Loss Trip Level in percent
22 22 (0x16) Get UINT V Phase Loss Debounce V Phase Loss Debounce
23 23 (0x17) Get/Set BOOL Protection start inhibit enable Protection start inhibit enable
24 24 (0x18) Get/Set USINT Undervoltage start inhibit
threshold
Undervoltage start inhibit threshold
25 25 (0x19) Get/Set USINT Voltage Imbalance start inhibit
threshold
Voltage Imbalance start inhibit threshold
26 26 (0x1A) Get/Set USINT Over Voltage start inhibit
threshold
Over Voltage start inhibit threshold
27 27 (0x1B) Get/Set USINT Protection Under Voltage Restart
Fault Level (Percent)
Protection Under Voltage Restart Fault Level (Percent)
28 28 (0x1C) Get/Set USINT Protection Under Voltage Restart
Restoration Level (Percent)
Protection Under Voltage Restart Restoration Level (Percent)
29 29 (0x1D) Get/Set UINT Undervoltage restart max time for
immediate restart
Undervoltage restart max time for immediate restart
30 30 (0x1E) Get/Set UDINT Undervoltage restart delay short Undervoltage restart delay short
31 31 (0x1F) Get/Set UDINT Undervoltage restart max time for
delayed restart short
Undervoltage restart max time for delayed restart short
32 32 (0x20) Get/Set UINT Undervoltage restart delay long Undervoltage restart delay long
33 33 (0x21) Get/Set UINT Undervoltage restart max time for
delayed restart long
Undervoltage restart max time for delayed restart long
Table 101. Voltage Object—Class 0x93 (147), continued