1.4 Product information
The main system specifications are indicated on the
product rating plates. Further information is available from
the information pack that includes this manual.
1.4.1 Product Rating Plate
A complete product rating plate is made up of a main
rating plate with supplementary rating plates if required.
The main product rating plate is headed with the Eaton
logo.
The type of switching system, the type of panel it contains
and the components used determine the complete
product rating plate. Each panel contains a complete
product rating plate. This also applies to the withdrawable
part (i.e. circuit breaker or contactor unit). Fig. 1-3 shows
one example of product rating plate of the fixed part. For
the product rating plate on the withdrawable part, refer to
the manual of the withdrawable part (i.e. circuit breaker or
contactor unit).
To Next Page
Loading...
