Eaton Power Xpert UX 17.5 - Bus-Section Panel (Connecting Panel)

Product description
Power Xpert
®
UX with W-VACi circuit breaker 6063308 G01 01 14 July 2011 www.eaton.com
19
2.2.2 Bus-section panel (connecting panel)
The bus-section panel is used to separate or connect
parts of the installation (bus-sections).
The bus-section panel in the illustration consists of two
panels; one panel contains the circuit breaker, the other
panel is the bus riser panel. The Power Xpert
®
UX has
designs that allow for the bus-section to be mounted
either on the Left or the Right of the riser panel. An
additional option with Power Xpert
®
UX Switchgear is
that the bus riser panel can be supplied suitably
equipped with a number of units:
- Circuit Breaker
- Contactor
- Earthing Truck
- Voltage Transformer
- Disconnect/Isolation
Bus sectionaliser + Bus Riser
A. Sectionaliser panel
B. Riser panel right
C. Bus-section circuit breaker
Bus Riser + Bus sectionaliser
A. Riser panel left
B. Sectionaliser panel
C. Bus-section circuit breaker
Fig. 2-10 A bus-section and riser; the bay is two panels wide
A
C
B
A
C
B