COMMUNICATION
EATON Powerware
®
9125 (9910-E30) UPS Installation Guide for IBM
®
Applications S 164201696 Rev 1
43
On-Bypass Relay Jumper
(J3)
On-Bypass
Disabled
On-Bypass
Enabled
AS/400NORM
Figure 41. On-Bypass Relay Jumper
3. To prevent electrostatic discharge (ESD), place one hand on a metal
surface such as the UPS rear panel.
Align the Single-Port Card with the slot guides and slide the card
into the slot until it is firmly seated.
4. Secure the Single-Port Card with the screws removed in Step 1.
To Next Page
Loading...
