Eaton PowerXL DA1 - Sine Filter

6 Technical Data
6.11 Sine filter
190 DA1 Variable Frequency Drives 11/16 MN04020005Z-EN www.eaton.com
6.11 Sine filter
Figure 107:Sine filter DX-SIN3…
￫
Sine filter DX-SIN3… should only be operated with fixed
switching frequencies.
Accordingly, the switching frequency (P2-24) must be set to the
value set in parameter P6-02 (auto temperature management)
(P2-24 = P6-02).
Permissible switching frequencies for DA1 with DX-SIN3…:
1  8 kHz; 2 12 kHz
As a result of double modulation, the value set on the DA1
variable frequency drive will be twice the effective value on the
sine filter (1  8kHz
 4 kHz; 2  12 kHz  6 kHz).