7 Accessories
7.1 List of accessories
DA1 Variable Frequency Drives 11/16 MN04020005Z-EN www.eaton.com 195
7 Accessories
7.1 List of accessories
Type Description Document
DX-KEY-.... External keypad AP040022
DXA-EXT-3 RO Adds three relay outputs IL040006ZU
DXA-EXT-3Dl1RO
Adds three digital inputs and one relay output IL040007ZU
DXA-EXT-ENCOD
Dual-channel encoder module for using closed-loop vector
control
AP040028DE
DX-NET-SWD1
Interface card for connecting to a SmartWire-DT network MN04012009Z
DX-COM-STICK Parameter copying stick for establishing a Bluetooth
connection to PC software
MN040003
DX-COM-PCKIT
Wired communication between DA1 and PC MN040003
DX-CBL-PC1M5 Wired communication between DA1 and PC MN040003
DX-SPL-R145-2SL1PL RJ45, 8-pin, splitter, 2 sockets, 1 plug on short connection
cable
lL04012023Z
DX-SPL-RJ45-3SL
RJ45, 8-pin, splitter, 3 sockets lL04012023Z
DX-SPL-RJ45 RJ45, 8-pin, splitter, 2 sockets, 1 plug IL 040026ZU
DX-SPL-RJ45-TERM RJ45, 8-pin, splitter, 1 socket, 1 plug, integrated bus
termination resistor for CANopen and Modbus
IL 040026ZU
DX-EMC-MNT...
EMC cable bracket. Can be used to route and secure cables
in the connection area
lL040010ZU
drivesConnect
PC parameter configuration software for variable frequency
drives, with integrated oscilloscope function, drive control
function, and function block creation for DA1
MN040003