Eaton PowerXL DA1 - 1.5.3 Degree of protection IP55 (FS4, FS5, FS6, FS7)

1 DA1 device series
1.5 Description
DA1 Variable Frequency Drives 11/16 MN04020005Z-EN www.eaton.com 25
1.5.3 Degree of protection IP55 (FS4, FS5, FS6, FS7)
The following drawing serves as an example showing the designations used
for the elements in DA1 variable frequency drives with a frame size of FS4
and an IP55 degree of protection.
Figure 12:DA1 designations (FS4, IP55)
a Operating unit with 5 control buttons and OLED display
b Slot for fieldbus connection or expansion module
c Control signal terminals and relay terminals (plug-in)
d Connection terminals in power section
e Device fan
f Fixing holes
g Blanking plate for installing cable glands for an IP55 degree of protection
(without blanking plate: IP40 degree of protection)
h Retainer for the control section connection cables
i Communication interface (RJ45)
j Enclosure cover (connection terminals)
The info card is located inside the lower enclosure cover  (removed in the
figure above).
Blanking plate
Figure 13:Blanking plate with holes for cable glands (FS4, FS5)
COM
1
2
3
4
5
6
7
8
9
1
0 11
12
1
3
14 15 16 1
7
1
8
U
V
W
BR
-
DC
+DC
⑧
⑦
⑥
①
②
⑤
③
④
⑨
⑩
￫
The equipment supplied with frame sizes FS4 and FS5 includes
an additional blanking plate  that already has holes for the
cable glands.