0 About this Manual
0.1 Target group
DA1 Variable Frequency Drives 11/16 MN04020005Z-EN www.eaton.com 5
0 About this Manual
This manual (11/16 MN04020005Z-EN) contains specific information
designed to enable you to select and connect a DA1 variable frequency drive.
It covers all DA1 frame sizes.
Any differences between and special characteristics of the various models
will be noted accordingly. Accessories that can be used to modify the DA1
variable frequency drive according to your specific needs will be listed where
applicable.
0.1 Target group
The content of MN04020005Z-EN manual is written for engineers and
electricians. Electrical engineering and physics-related knowledge and skills
will be required in order to be able to commission the corresponding devices.
We assume that you have a good knowledge of engineering fundamentals
and that you are familiar with handling electrical systems and machines, as
well as with reading technical drawings.
0.2 List of revisions
The following significant amendments have been introduced since previous
issues:
￫
“Parameter manual“
A separate manual – MN04020006Z-EN (“Parameter Manual”) –
goes over how to configure the parameters for DA1 variable
frequency drives and provides application examples as well.
This manual is available on the Eaton website at:
www.eaton.eu/Europe/Electrical/CustomerSupport/DownloadCenter/
index.htm Customer support Download Center –
Documentation
In the Quick Search box, enter “MN04020006Z”.
Then click on Search.
Publication
date
Page Keyword New Modified Deleted
11/16 66 P1-12 = 12
✓
01/16 – Manual split into this installation manual
(= MN04020005Z-EN) and a parameter
configuration manual (= MN04020006Z-EN)
as well as revised in general
✓
various Performance expansion up to 250 kW (400 V)
✓
various Rated operating voltages up to 600 V
✓
59 STO function (Safe Torque Off)
✓
10/12 Initial issue
To Next Page
Loading...
