Eaton PowerXL DA1 - 3.6.1.4 Connection terminals on frame sizes FS2 and FS3 with IP66

3 Installation
3.6 Electrical Installation
DA1 Variable Frequency Drives 11/16 MN04020005Z-EN www.eaton.com 93
3.6.1.2 Connection for frame sizes FS4 to FS7 with IP55
On enclosures with an IP55 degree of protection (frame sizes FS4 to FS7),
the connection area will be located behind the lower enclosure cover.
Sizes FS4 and FS5
Figure 56:Removing the cover
Release the latches by turning them counterclockwise (90 degrees) so that
they are in a vertical position [1] and lift the cover off towards you [2].
Sizes FS6 and FS7
Figure 57:Removing the cover
Unscrew the two screws at the bottom [1], lift the cover from the bottom [2],
and then remove it towards you
1 2
3
4
5
6
7
8 9 10
11
12
13
14 15
16
1
7 18
L1
L2
L
3
+
DC
BR -DC
U
V
W
C
OM
2
5.8 x 1 mm
2 Nm (17.7 lb-in)
1
PZ 2
2 Nm (17.7 lb-in)
1
2
3