Eaton PowerXL DH1 - Table 93. Analog Value Object Instance Summary; Table 94. Analog Input Object Instance Summary

78
BACnet MS/TP—On-Board Communication
POWERXL SERIES VFD MN040010EN—June 2018 www.eaton.com
Analog value object instance summary
The following table summarizes the Analog Value Objects supported.
Table 93. Analog value object instance summary
Instance ID Object name Description Units Preset value access
AV0 Speed Reference Motor speed reference from network Percent C
AV1 Current Limit Current Limit Amps W
AV2 Min Frequency Minimum Frequency Hz W
AV3 Maximum Frequency Maximum Frequency Hz W
AV4 Accel Time 1 Acceleration Time seconds W
AV5 Decel Time 1 Deceleration Time seconds W
AV6 AnyParam ID Parameter ID number to be accessed No Units W
AV7 AnyParam Value Value of parameter defined by AV6 No Units W
AV8 Process Data In 1 Fieldbus Process Data In 1 NA C
AV9 Process Data In 2 Fieldbus Process Data In 2 NA C
AV10 Process Data In 3 Fieldbus Process Data In 3 NA C
AV11 Process Data In 4 Fieldbus Process Data In 4 NA C
AV12 Process Data In 5 Fieldbus Process Data In 5 NA C
AV13 Process Data In 6 Fieldbus Process Data In 6 NA C
AV14 Process Data In 7 Fieldbus Process Data In 7 NA C
AV15 Process Data In 8 Fieldbus Process Data In 8 NA C
ote: N For Present Value Access Types, R = Read-only, W = Writeable, C = Commandable.
Commandable values support priority arrays and relinquish defaults.
Table 94. Analog Input object instance summary
Instance ID Object name Description Units Preset value access
AI0 Frequency Setpoint Frequency Setpoint Hz R
AI1 Output Frequency Output Frequency Hz R
AI2 Motor Speed Motor Speed Rpm R
AI3 Motor Load Motor Load Percent R
AI4 Kilowatt Hours total Kilowatt Hour Counter (Total) scaled by 1000 KWh R
AI5 Motor Current Motor Current Amps R
AI6 DC link Voltage DC link Voltage Volts R
AI7 Motor Voltage Motor Voltage Volts R
AI8 Unit Temperature Heatsink Temperature °C R
AI9 Motor Torque In % of motor nominal Torque Percent R
AI10 Operating Days Operating Days (resettable) Day R
AI11 Operating Hours Operating Hours (resettable) Hour R
AI12 Motor Temperature Motor Temperature Percent R
AI13 Analog Input 1 Analog Input 1 Volts R
AI14 Analog Input 2 Analog Input 2 Volts R
AI15 Analog Output 1 Analog Output 1 Volts R
AI16 Analog Output 2 Analog Output 2 Volts R
AI17 Kilowatt Instantaneous Kilowatt Instantaneous KW R
ote: N For Present Value Access Types, R = Read-only.