Eaton PowerXL DM1-113D0NB-S20S - Chapter 5-Electrical installation; Electrical Installation Warnings and Cautions; Power Wiring Selection; Line and Motor Cable Installation

22
Chapter 4—Mechanical installation
POWERXL SERIES VFDS MN040060EN—September 2020 www.eaton.com
Step 4.
Clamp the cable with the optional card port. Mount the
option card to the drive by inserting the four snaps into the
slots on drive.
Step 5.
For enclosed type:
Install the terminal cover (1) to the drive then install the front
cover (2) to NEMA 1 kit.
For open type:
Only install the terminal cover to the drive.
2
Enclosed type
Open type
1