1 Device series DC1-S…
1.3 Checking the Delivery
DC1-S…20…, DC1-S…OE1 Variable Frequency Drives 05/21 MN040058EN www.eaton.com 11
1.3 Checking the Delivery
The DC1-S… series variable frequency drives are carefully packaged and
prepared for delivery. The devices should be shipped only in their original
packaging with suitable transportation materials. Please take note of the
labels and instructions on the packaging, as well as of those meant for the
unpacked device.
Open the packaging with adequate tools and inspect the contents
immediately after receipt in order to ensure that they are complete and
undamaged.
The packaging must contain the following parts:
• DC1-S… series variable frequency drive,
• an instruction leaflet
• IL04020014Z for devices with an IP20 degree of protection
• IL040001ZU for devices with an IP66 degree of protection,
Figure 3: Equipment supplied
(example: devices with IP20 / IP66 degree of protection with instruction leaflet)
￫
Before opening the package, please check the nameplate on it
to make sure that you received the correct variable frequency
drive.
L1/L
L2/N
L3
U
V
W
1
2
3
4
5
6
7
8
9
10
11
To Next Page
Loading...
