Eaton Corporation Page 33 Ver 1.1
H) Multiple Connections: Usage of Ethernet cable
Ethernet cable can be used to connect either port to another Super-485
card. The cable must be a “Straight Through cable” as shown in figure
6.2.8. And it is important to ensure the pin position of Ethernet cable is
configured by the same way as shown in figure 6.2.9.
Figure 6.2.8: Connecting Mode of Ethernet cable
Figure 6.2.9: Pin Definition of Ethernet cable
I) Multiple Connections - Combination Usage
The combined connection of RJ-45 PoE port and terminal block can be
implemented, but it is not recommended. However, figure 6.2.10
describes an example of a mixed configuration use.
Connection Type A Connection Type B
To Next Page
Loading...
