Eaton PV240 - Page 43

Eaton Corporation Page 43 Ver 1.1
Figure 6.4.3: Levels area and the size of Knockouts
Figure 6.4.4: Knocking points of inner level
Figure 6.4.5: Knocking points of outer level
Tools
A M4 size slotted screwdriver and hammer are required for
the opening procedure of knockouts.
Inner level area
Outer level area
Upper Knocking
Point
Lower Knocking
Point
Right-hand side
Knocking Point
Left-hand side
Knocking Point
0.5″
0.75″
1.25″
1″