Eaton SC200 - Page 126

SC200 Handbook
118
Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-50H November 2011
Event Type
Description
Additional Event
Information
Manual Equalize Stop
An Equalize cycle has been
manually stopped.
Manual Fast Charge
Start
A Fast Charge cycle has been
manually started.
Manual Fast Charge
Stop
A Fast Charge cycle has been
manually stopped.
Rectifier Restart
A rectifier was started manually.
This excludes events where a
rectifier starts due to Load-Based
Rectifier Shutdown or after the
removal of a fault condition.
Rectifier Shutdown
A rectifier was shut down
manually. This excludes events
where a rectifier shuts down due
to Load-Based Rectifier Shutdown
or a fault condition.
Reset Battery State
The battery state has been reset,
setting the value of Ah Discharged
back to zero.
Start Up
Records when the controller
started running.
Smart Alarm Activation
A smart alarm has become active.
Smart Alarm number
(DCTools) or name (Web).
Smart Alarm
Deactivation
A smart alarm has become
inactive.
Smart Alarm number
(DCTools) or name (Web).