Eaton SC200 - Digital Output (Relay) Activation

SC200 Mappings
Copyright © 2007-2011 Eaton Corporation. All Rights Reserved.
IPN 997-00012-50H November 2011
121
Digital
Output
Name
IOB
Number
IOB DO
Number
Connector
1
Summary Non Urgent
1
1
XH16
2
Low/High Load
1
2
XH17
3
Rectifier Fail
1
3
XH18
4
AC Fail
1
4
XH19
5
Load/Batt Disconnect
1
5
XH20
6
IOBGP 1 RY6/Mon OK
1
6
XH21
 Digital outputs are activated by mappings from alarms (see Digital Output (Relay) Mapping on
page 121) or by a test (see Digital Outputs on page 75).
LVD connector mappings
For details refer to LVD Configuration on page 41.
Digital Output (Relay) Activation
Any alarm can activate one or two digital outputs (A and B).
► To map digital outputs
See System Alarms on page 46, Smart Alarms on page 49, Analog Inputs on page 71, Digital
Inputs on page 74 and Digital Outputs on page 75.