Eaton SLX9000 - Appendix D - Option Board Kits; 230 V, FR7 - FR8 460 V and 575 V Drives; Figure D-1: Option Boards; Table D-1: Option Board Kits

SLX9000 Adjustable Frequency Drives User Manual
MN04001004E
For more information visit: www.eaton.com D-1
January 2009
Appendix D — Option Board Kits
230V, FR7 – FR8 460V and 575V Drives
The factory installed standard board configuration includes an A9 I/O board and an A2 relay
output board, which are installed in slots A and B.
Figure D-1: Option Boards
Table D-1: Option Board Kits

Option card must be installed in one of the slots listed for that card. Slot indicated in Bold is the preferred location.

AI = Analog Input; AO = Analog Output, DI = Digital Input, DO = Digital Output, RO = Relay Output
A
B
C
D
E
Option Kit
Description

Allowed
Slot
Locations

Field
Installed
Factory
Installed 9000X Ready Programs
Catalog
Number
Option
Designator Basic
Local/
Remote Standard MSS PID Multi-P. PFC
Standard I/O Cards (See Figure D-1)
2 RO (NC/NO) B OPTA2 — XX X XXX X
6 DI, 1 DO, 2 AI, 1AO, 1
+10V DC ref, 2 ext +24V DC/
EXT +24V DC
A OPTA9 — XX X XXX X
Extended I/O Card Options
2 RO, Therm B OPTA3 A3 —X X XXX X
Encoder low volt +5V/15V24V C OPTA4 A4 —X X XXX X
Encoder high volt +15V/24V C OPTA5 A5 —X X XXX X
Double encoder — SPX Only C OPTA7 A7 XX X XXX X
6 DI, 1 DO, 2 AI, 1 AO A OPTA8 A8 —X X XXX X
3 DI (Encoder 10 – 24V),
Out +15V/+24V, 2 DO
(pulse+direction) — SPX Only
C OPTAE AE XX X XXX X