Eaton SLX9000 - Changing EMC Protection Class from H to T; Figure 2-9: Changing of EMC Protection Class, MF4 (Left) and; Figure 2-10: Changing of EMC Protection Class, MF6

SLX9000 Adjustable Frequency Drives User Manual
2-10 For more information visit: www.eaton.com
MN04003020E
January 2009
Changing EMC Protection Class from H to T
The EMC protection class of SLX9000 drive frames MF4 – MF6 can be changed from class H
to class T with a simple procedure presented in Figure 2-9 – 2-10.
Figure 2-9: Changing of EMC Protection Class, MF4 (left) and MF5 (right), 460V
Figure 2-10: Changing of EMC Protection Class, MF6
Note: Do not attempt to change the EMC-level back to class H. Even if the procedure above is
reversed, the drive will no longer fulfill the EMC requirements of class H!
Remove this screw Remove this screw
Remove this screw