Eaton SLX9000 - Control Connections; Figure 4-2: Option Board Slots; Figure 4-3: Control Connections, MF4 - MF6 460 V; Mf4 - Mf6 460 V

SLX9000 Adjustable Frequency Drives User Manual
4-2 For more information visit: www.eaton.com
MN04003020E
January 2009
Option Board General Information
The FR7 and FR8 drives can accommodate a wide selection of expander and adapter option
boards to customize the drive for your application needs.
The drive’s control unit is designed to accept a total of five option boards. Option boards are
available for normal analog and digital inputs and outputs, communication and additional
application-specific hardware.
The factory-installed standard option board configuration includes an A9 I/O board and an A2
relay output board, which are installed in slots A and B. For information on additional option
boards, see the 9000X Series Drives Option Board User Manual.
Figure 4-2: Option Board Slots
All 230V, FR7 – FR8 480V and All 575V.
Control Connections
MF4 – MF6 460V
The basic control connections for MF4 – MF6 are shown on Page 4-3.
Figure 4-3: Control Connections, MF4 – MF6 460V
D
C
B
A
E
21 22 23
87456
123
30B18 19 A
91011