Eaton SLX9000 - Chapter 5 - Menu Information; Keypad Operation; Indicators on the Keypad Display; Figure 5-1: Control Keypad and Drive Status Indications

SLX9000 Adjustable Frequency Drives User Manual
MN04003020E
For more information visit: www.eaton.com 5-1
January 2009
Chapter 5 — Menu Information
Keypad Operation
The control keypad is the link between the SLX9000 drive and the user. The control keypad
features an alphanumeric display with seven indicators for the Run status (RUN,
counterclockwise, clockwise, READY, STOP, ALARM, FAULT) and three indicators for the
control place (I/O term/Keypad/BusComm).
The control information, i.e. the menu number, the displayed value and the numeric
information are represented with numeric symbols.
The drive is operable through the seven pushbuttons of the control keypad. Furthermore, the
buttons can be used in setting parameters and monitoring values.
The keypad is detachable and isolated from the input line potential.
Indicators on the Keypad Display
Figure 5-1: Control Keypad and Drive Status Indications
ENTER
START
STOP
RUN
STOP
mA V s % kHz °C °F rpm kWh
READY ALARM FAULT
I/O Term Keypad Bus/Comm
reset