SLX9000 Adjustable Frequency Drives User Manual
5-4 For more information visit: www.eaton.com
MN04003020E
January 2009
Menu Navigation
The data on the control keypad are arranged in menus and submenus. The menus are used
for the display and editing of measurement and control signals, parameter settings (see
Page 5-8) and reference value (see Page 5-11) and fault displays (see Page 5-11).
Figure 5-3: Keypad Display Data
The first menu level consists of menus M1 to E7 and is called the Main Menu. The user can
navigate in the main menu with the Browser buttons up and down. The desired submenu can
be entered from the main menu with the Menu buttons. When there still are pages to enter
under the currently displayed menu or page, the last digit of the figure blinks and you can
reach the next menu level by pressing Menu Button Right.
The control keypad navigation chart is shown in Figure 5-4. Please note that menu M1 is
located in the lower left corner. From there you will be able to navigate your way up to the
desired menu using the menu and browser buttons.
You will find more detailed descriptions of the menus later in this chapter.
STOP
READY
I/O Term
Location
To Next Page
Loading...
