Eaton SLX9000 - Figure 5-5: Monitoring Menu

SLX9000 Adjustable Frequency Drives User Manual
MN04003020E
For more information visit: www.eaton.com 5-7
January 2009
Monitoring Menu (M1)
You can enter the Monitoring menu from the Main menu by pressing Menu Button Right
when the location indication M1 is visible on the display. Figure 5-5 shows how to browse
through the monitored values.
The monitored signals carry the indication V#.# and listed in Table 5-5. The values are
updated once every .3 seconds.
This menu is for signal checking. The values cannot be changed. To change values of the
parameters, see Page 5-8.
Figure 5-5: Monitoring Menu
STOP
READY
I/O Term STOP
READY
I/O Term STOP
READY
I/O Term
STOP
READY
I/O Term