Eaton SLX9000 - Figure 5-11: Storing and Loading of Parameter Sets

SLX9000 Adjustable Frequency Drives User Manual
MN04003020E
For more information visit: www.eaton.com 5-15
January 2009
Table 5-8: System Menu Functions (Continued)
Copy Parameters
The Copy parameters submenu (S6.3) is located under the System menu.
The SLX9000 drive allows the user to store and load two customized parameter sets (all
parameters included in the application, not the system menu parameters) and to load back
the factory default parameter values.
Parameter Sets (S6.3.1)
On Parameter sets page (S6.3.1), push the Menu Button Right to enter the Edit menu. You can
store or load two customized parameter sets or load back the factory defaults. Confirm with
the ENTER button. Wait until 8 (=OK) appears on the display.
Figure 5-11: Storing and Loading of Parameter Sets
Code Function Min. Max. Unit Default Cust. Selections
P6.10.2 Fieldbus protocol 1 1 1 0 = Not used
1 = Modbus protocol
P6.10.3 Slave address 1 255 1 Addresses 1 – 255
P6.10.4 Baud rate 0 8 5 0 = 300 baud
1 = 600 baud
2 = 1200 baud
3 = 2400 baud
4 = 4800 baud
5 = 9600 baud
6 = 19200 baud
7 = 38400 baud
8 = 57600 baud
P6.10.5 Stop bits 0 1 0 0 = 1
1 = 2
P6.10.6 Parity type 0 2 0 0 = None
1 = Odd
2 = Even
P6.10.7 Communication
timeout
0 300 s 0 0 = Not used
1 = 1 second
2 = 2 seconds, etc.
STOP
READY
I/O Term STOP
READY
I/O Term
STOP
READY
I/O Term
STOP
READY
I/O Term
ENTER
reset