Eaton SLX9000 - Figure 5-16: Mwh Counter Reset; Table 5-9: Counter; Table 5-10: Trip Counter Pages; Table 5-11: Software Information Pages

SLX9000 Adjustable Frequency Drives User Manual
5-20 For more information visit: www.eaton.com
MN04003020E
January 2009
Trip Counters Submenu (S6.8.2)
Trip counters (menu S6.8.2) are counters with values of which can be reset i.e. restored to
zero. You have the following resettable counters at your disposal:
Table 5-10: Trip Counter Pages
Note: The trip counters only run when the motor is running.
Example: When you want to reset the operation counters, you should do the following:
Figure 5-16: MWh Counter Reset
Software Into Submenu (S6.8.3)
The following information can be found under the Software Info submenu (S6.8.3):
Table 5-11: Software Information Pages
Page Counter
C6.8.2.1 MWh counter
P6.8.2.2 Clear mWh counter
T6.8.2.3 Operation day counter
T6.8.2.4 Operation hour counter
P6.8.2.5 Clear operation time counter
Page Content
I6.8.3.1 Software package
I6.8.3.2 System software version
I6.8.3.3 Firmware interface
I6.8.3.4 System load
STOP
READY
I/O Term STOP
READY
I/O Term
STOP
READY
I/O Term STOP
READY
I/O Term
ENTER
reset