Eaton SLX9000 - Table 5-12: Application Information Pages; Table 5-13: Hardware Information Pages; Table 5-14: Connected Options Submenu

SLX9000 Adjustable Frequency Drives User Manual
MN04003020E
For more information visit: www.eaton.com 5-21
January 2009
Application Information Submenu (S6.8.4)
You can find the following information from the Application Info submenu (S6.8.4):
Table 5-12: Application Information Pages
Hardware Information Submenu (S.8.5)
You can find the following information from the Hardware Info submenu (S6.8.5):
Table 5-13: Hardware Information Pages
Connected Options Submenu (S6.8.6)
The Connected options submenu (S6.8.6) shows the following information on the option
board connected to the drive:
Table 5-14: Connected Options Submenu
In this submenu you find information about the option board connected to the control board
(see Chapter 4).
You can check the status of the slot by entering the board submenu with the Menu Button
Right and using the Browser buttons. Push the Menu Button Right again to display the status
of the board. The selections are shown in Table 5-8. The keypad will also display the program
version of the respective board when you push either one of the Browser buttons.
For more information on the expander board-related parameters, see Page 5-26.
Page Content
A6.8.4.1 Application
D6.8.4.1.1 Application ID
D6.8.4.1.2 Version
D6.8.4.1.3 Firmware interface
Page Content
I6.8.5.2 Unit voltage
I6.8.5.3 Brake chopper
Page Content
S6.8.6.1 Slot E option board
I6.8.6.1.1 Slot E option board status
I6.8.6.1.2 Slot E program version
S6.8.6.2 Slot D option board
I6.8.6.2.1 Slot D option board status
I6.8.6.2.2 Slot D program version