SM65 Supervisory Module Handbook
8
Copyright © 2004-2009 Eaton Corporation. All Rights Reserved.
IPN 997-00012-35E December 2009
Keypad and Display
Rack Mount Version Panel Mount Version
"
Backlit LCD Display
#
Keypad
$
Power On LED (green) – indicates that the SM65 is powered
%
Non-urgent Alarm LED (yellow) – indicates one or more active Non-urgent alarms
!
Urgent/Critical Alarm LED (red) – indicates one or more active Urgent/Critical alarms
7
6
Scroll: Press to scroll through lists and menus and to increase or decrease
configuration file values.
:
Information: Press to view status messages and a list of active alarms in Status View
Mode.
8
Enter: Press to go to Configuration Mode and Edit Mode, save configuration file
changes, clear alarms or toggle relay states.
9
Escape: Press to go to Main Display Mode or cancel configuration file changes.
Display indicators
<
Urgent/Critical alarm.
=
Non-urgent alarm.
AAA
The system value cannot be displayed, because of a failed, disconnected or
unconfigured sensor.
>?@
Press a scroll key to view further display items.
To Next Page
Loading...
