Transmission appearance may differ, procedure is the same.
18
Tool Reference
Some repair procedures pictured in this manual show
the use of specialized tools. Their actual use is
recommended as they make transmission repair
easier, faster, and prevent costly damage to critical
parts.
But for the most part, ordinary mechanic's tools such
as socket wrenches, screwdrivers, etc., and other
standard shop items such as a press, mauls and soft
bars are all that is needed to successfully disassemble
and reassemble any Eaton Fuller Transmission.
The specialized tools can be obtained from a tool
supplier or made from tool prints as required by the
individual user. Detailed Eaton Fuller Transmission
Tool Prints are available upon request by writing to:
Eaton Corporation
Transmission Division
Technical Service Dept.
P.O. Box 4013
Kalamazoo, Michigan 49003
To Next Page
Loading...
