Eaton WaveLinx - Page 101

101
WaveLinx User Manual
www.eaton.com/wavelinx
Step 4: Open the web browser. In the web browser address bar, enter the IP address of the Wireless Area Controller. (The
default IP address if connecting through the onboard wireless access point is 192.168.100.1.) The first time the Wireless Area
Controller is accessed, the browser may display message windows regarding the site security certificate. The display and
wording of these messages may differ between web browsers. Locate the option to bypass the warning to proceed to the site.
Launch the web
browser
Type in the Wireless Area
Controller IP address
Select the option to bypass the
security certificate warning
Step 5: In the log in screen, enter the username and password for the administrator user.
•
Default Username: WclAdmin
•
Default Password: wclAdmin