135
WaveLinx User Manual
www.eaton.com/wavelinx
Device Type How to remove pre-existing pairing
WaveLinx Wireless Dimming Switchpack
(WSP-MV-010: 120-277VAC model)
Cycle the power to (switch OFF and then ON) the device’s circuit six times. This removes pairing for ALL devices
of this type on the affected circuit.
WaveLinx Integrated Sensor
WaveLinx Industrial Integrated Sensor
WaveLinx Outdoor Integrated Sensor
WaveLinx Tilemount Sensor
WaveLinx Wallstations
standard line voltage powered
To Next Page
Loading...
