Eaton WaveLinx - Modifying Demand Response Behavior

96
WaveLinx User Manual
www.eaton.com/wavelinx
Modifying Demand Response Behavior
To modify or test demand response behavior:
Step 1: Open the WaveLinx Mobile Application and establish a connection with the Wireless Area Controller as the administrator user.
Step 2: In the areas list, select the first area to modify.
Step 3: Select the gear icon in the upper-right corner to open the area menu screen, and then in the area menu, select the demand response
option.
Select the gear icon to
open the area menu
Select the demand
response option