Eaton XN300 - 15.2 Technical data for digital outputs

15 Digital output module XN-322-8DO-P05
15.2 Technical data for digital outputs
XN300 slice modules 02/24 MN050002EN Eaton.com 96
15.2 Technical data for digital outputs
Quantity 8
Short-circuit proof as per EN 61131-2 Yes
Power supply for digital outputs
Number of supply voltages 1 (X3, pin on connector 24)
Rated operating voltage U
e
24 Vdc
admissible range 18 – 30 VDC
Residual ripple  5%
Maximum permissible total current per
power supply group, with eight channels
each, when using a duty factor of 100%
4A
Protection against polarity reversal no
Output characteristic data
„1“ signal
Output voltage (U
e
- 1V) < U
a
< U
e
Output current per channel 0.5 A
„0“ signal
Output voltage < 0.1 VDC
Max. output current per channel
 10 A
Switching-on delay < 100 s
Switch off delay < 100 s
Maximum permissible total current for all
channels when using a duty factor of
100%
4A
Maximum breaking energy of outputs
(inductive load)
1 Joule/channel