Eaton XN300 - 19.4 Technical data

19 Digital input/output module XN-322-16DIO-PD05
19.4 Technical data
XN300 slice modules 02/24 MN050002EN Eaton.com 126
19.4 Technical data
19.4.1 Digital inputs
19.4.2 Digital outputs
Designation
Number of channels 8
61131-2 Type1
Input voltage U
E
24 Vdc maximum 30 VDC
Signal level
LOW: 0 < U
E
< +8 V HIGH: +14 V < U
E
< +30 V
Switching threshold
normally +11 VDC
Input current at UE =24VDC normally 3.7 mA
Input delay normally 5 ms
Quantity 8
Short-circuit proof as per EN 61131-2 Yes
Power supply for digital outputs
Number of supply voltages 1 (X5, pin on connector 24)
Rated operating voltage U
e
24 Vdc
admissible range 18 – 30 VDC
Maximum permissible total current for all output chan-
nels when using a duty factor of 100%
4A
Protection against polarity reversal
no
Voltage monitoring
Yes
Output characteristic data
„1“ signal
Output voltage (U
e
- 1V) < U
a
< U
e
Output current per channel 0.5 A
„0“ signal
Output voltage < 1 VDC
Max. output current per channel
 10 A
Switching-on delay
< 100 s
Switch off delay < 150 s
Maximum breaking energy of outputs (inductive load) 1 Joule/channel