0 About this manual
0.5 Device designations and abbreviations
XN300 slice modules 02/24 MN050002EN Eaton.com 14
0.5 Device designations and abbreviations
• COB-ID - Communication OBject IDentifier
• DIP - Dual Inline Package
• EDS - Electronic Data Sheet
• PDO - Process Data Objects
• RPDO - Receive Process Data Objects
• SDO - Service Data Objects
• SSI - Synchronous Serial Interface
• TPDO - Transmit Process Data Objects
• XN300 - Device series, including the XN-312-GW-… gateways and XN-
322 slice modules
Following designations XSOFT-CODESYS are used:
• Module - System bus module
• Station - Coordinator
• Station address - Address of the field bus module
0.6 Writing conventions
Symbols used in this manual have the following meanings:
a
Indicates instructions to be followed.
For greater clarity, the name of the current chapter and the name of the cur-
rent section are shown at the top of each page.
DANGER
Warns of hazardous situations that result in serious injury or
death.
CAUTION
Warns of the possibility of hazardous situations that could result
in slight injury or even death.
NOTICE
Warns about the possibility of material damage.
￫
Indicates useful tips.
To Next Page
Loading...
