Eaton XN300 - Page 181

24 Analog input module XN-322-8AI-I
24.5 Memory layout
177 XN300 slice modules 02/24 MN050002EN Eaton.com
24.5 Memory layout
￫
For product-specific CANopen or EtherCAT objects please refer
to the manual for the respective gateway:
"CANopen Gateway XN-312-GW-CAN", MN050003EN
"EtherCAT Gateway XN-312-GW-EC", MN050010EN.
CAN
Object
Index
Default
CAN
Mapping
EtherCAT
Object
Index
Size
(byte)
Local I/O
description
Local I/O
addresses
– – 0x9xx0
SUB 01
4 ModuleState –
0x1027 – 0x9xx0
SUB 02
CAN:2
EC:4
CAN: ModuleID
EC: DeviceID
Module ID number –
– – 0x9xx0
SUB 03
4 FPGAVersion –
– – 0x9xx0
SUB 04
4 DeviceType –
– – 0x9xx0
SUB 05
4 VendorID –
– – 0x9xx0
SUB 06
4 ProductCode –
– – 0x9xx0
SUB 07
4 Revision –
– – 0x9xx0
SUB 09
4 HWVersion –
– – 0x9xx0
SUB 0A
4 FWVersion –
0x3090
0x6401
0x6xxD
SUB 01
2 ModuleDiag Bit 0 reserved 0x0080
Bit 1 No SYNC signal
Bit 2 FLASH-CRC error
Bit 3 RAM-CRC error
Bit 4 Flash memory error
Bit 5-15 reserved
0x3091 0x6401 0x6xx1
SUB 01
2 InputChannel1 0x0082
0x3092 0x6401 0x6xx1
SUB 02
2 InputChannel2 0x0084
0x3093 0x6401 0x6xx1
SUB 03
2 InputChannel3 0x0086
0x3094 0x6401 0x6xx1
SUB 04
2 InputChannel4 0x0088
0x3095 0x6401 0x6xx1
SUB 05
2 InputChannel5 0x008A
0x3096 0x6401 0x6xx1
SUB 06
2 InputChannel6 0x008C