Eaton XN300 - 25.1 Status LEDs

25 Analog input module XN-322-8AI-PTKT
25.1 Status LEDs
XN300 slice modules 02/24 MN050002EN Eaton.com 180
25 Analog input module XN-322-8AI-PTKT
The XN-322-8AI-PTKT module is an XN300 slice module with eight analog
input channels used to measure temperatures with Pt1000 and KTY sensors
or resistance values within a fixed resistance range. These modules support
two-wire connections. Every channel can be individually configured.
25.1 Status LEDs
Figure 101: LED signals and pin assignment
a Module status LED
b User LED
Module status
Green ON System OK
OFF No power
FLASHES (5 Hz) No communications
User yellow ON The user can set the LED signals as necessary.
(For example, the visualization interface can be used to set
the module's LED to flash so that it is easier to find the
module inside the control panel.)
OFF
FLASHES (2 Hz)
FLASHES (4 Hz)
X1
8AI
PTKT
S
U
X2
X3
X4
①
②
1+
1-
2+
2-
3+
3-
4+
4-
5+
5-
6+
6-
7+
7-
8+
8-