Eaton XN300 - 29.6 Technical specifications

29 Analog input/output module ±10 V XN-322-4AIO-U2
29.6 Technical specifications
219 XN300 slice modules 02/24 MN050002EN Eaton.com
29.6 Technical specifications
29.6.1 Analog inputs ±10 V / 0…100%
29.6.2 Analog outputs ±10 V
Number of channels 2
Measurement type Differential input Potentiometer input
Measuring range V -10 V ...+10 V 0 …100 % (potentiometer)
Measurement display -10,000 ... +10,000 0 ... 10,000
D-A converter Bit 16
Resolution 0,3 mV / LSB
Conversion time per channel ms 1
Common-mode range V ±12
Input resistance M > 10
Open wire monitoring Yes
Input filters
Hardware Typically: 1 kHz, third-order low-pass filter
Software, parameterizable parameterizable
Cumulative error as a
percentage of full scale value
% ±0.3 ±0.35
Number of channels 2
Measuring range V -10 …+10
Measurement display
-10,000 ...+10,000
D-A converter Bit 12
Resolution
approx. 5 mV / LSB
Internal module refresh time s
 250
Minimum load resistance k > 5
Maximum capacitive load nF 100
Short-circuit proof yes (max. 1 minute)
Settling time (typical) for
63% of end value s 50
86% of end value s 100
99% of end value s 250
Cumulative error as a
percentage of full scale value
% ±0.5