Eaton XN300 - 31.4 Technical specifications

31 XN-322-4AIO-I analog input/output module
31.4 Technical specifications
237 XN300 slice modules 02/24 MN050002EN Eaton.com
31.4 Technical specifications
31.4.1 Analog inputs
31.4.2 Analog outputs
Channels Value
Number of channels 2 analog input channels
Measuring range 0…20 mA
Measured value 0…20000
D-A converter 16 Bit
Resolution 0.3 A/ LSB
Conversion time per channel 1ms
Common-mode range ± 10 V
Input resistance
50 
Input filters
Hardware typically 1 kHz (third-order low-pass filter)
Software (parameterizable) parameterizable
Open wire monitoring Yes
Measuring accuracy
Total error limit ±0.5% of full scale value
Channels Value
Number of channels 2 analog output channels
Measuring range 0…20 mA 4…20 mA
Measured value 0…20000 4000…20000
D-A converter 12 Bit
Resolution
5 A / LSB
Conversion time per channel
1ms
Load resistance (burden) 0 < R
burden
< 500 
Max. permissible output capacitance 1 F with 50  burden
Open wire monitoring
No
Settling time (typical) for
63% of end value 50 s + R
burden 
R
L capacitive
86% of end value 100 s + 2

R
burden 
R
L capacitive
99% of end value 250 s + 5

R
burden 
R
L capacitive
Measuring accuracy
Total error limit ±0.5% of full scale value