5 Power distribution 0 V XN-322-18PD-M
5.1 Pin assignment
XN300 slice modules 02/24 MN050002EN Eaton.com 34
5 Power distribution 0 V XN-322-18PD-M
XN-322-18PD-M modules are passive XN300 field potential distribution slice
modules. They provide an output potential of 0 V for a total of 18 pins. This
means that this 0 V potential can be tapped without the need for additional
terminal strips.
XN-322-18PD-M modules are normally used together with XN-322-18PD-P
modules in order to ensure that XN300 slice modules can be segmented into
groups that can be fused and switched as such. When used together with
digital slice modules, these modules make it possible to use two-wire and
three-wire connection configurations.
5.1 Pin assignment
a X1
– 1 GND output 1
– 2 GND output 2
– 3 GND output 3
– 4 GND output 4
b X2
– 5 GND output 5
– 6 GND output 6
– 7 GND output 7
– 8 GND output 8
c X3
– 9 GND output 9
– 10 GND output 10
– 11 GND output 11
– 12 GND output 12
d X4
– 13 GND output 13
– 14 GND output 14
– 15 GND output 15
– 16 GND output 16
e X5
– 17 GND output 17
– 18 GND output 18
– 0 V GND input
– 0 V GND input
Figure 19: LED signals and pin assignment for XN-322-18PD-M
X1
1
2
3
4
X2
5
6
7
8
X3
9
10
11
12
X4
13
14
15
16
X5
17
18
0V
0V
18PD
M
①
②
③
④
⑤
To Next Page
Loading...
