Eaton XN300 - 7.1 Status LEDs; 8 Digital input module XN-322-16 DI-PD

7 Digital input module XN-322-8DI-PD
7.1 Status LEDs
41 XN300 slice modules 02/24 MN050002EN Eaton.com
7.1 Status LEDs
Figure 25: LED signals and pin assignment for XN-322-8DI-PD
a Module status LED
b User LED
c Status LEDs for inputs 1 to 8
Module status Green ON System OK
OFF No power
FLASHES (5 Hz) No communications
User yellow ON The user can set the LED signals as necessary.
(For example, the visualization interface can be used to set
the module's LED to flash so that it is easier to find the
module inside the control panel.)
OFF
FLASH
(200 ms ON,
1000 ms OFF)
FLASH
(1000 ms ON,
200 ms OFF)
Status input 1
...
Input 8
Green ON Input ON
OFF Input OFF
X1
1
2
3
4
8DI
PD
S
U
X2
5
6
7
8
①
②
③