Eaton XN300 - 11.3 Wiring topic

11 XN-322-20DI-PCNT digital input module with counter
11.3 Wiring topic
65 XN300 slice modules 02/24 MN050002EN Eaton.com
11.3 Wiring topic
There are 20 digital inputs wired to each of the connectors from X1 to X5
connectors.
11.3.1 Wiring up the digital inputs
The digital input, which conforms to EN 61131-2 type 1, is particularly suit-
able for connecting electronic sensors. It is used to convert a signal with two
possible states into a one-bit binary number.
Figure 40: Input wiring

X1
12
34 8
X2
56
7
X3
910
11 12 16
X4
13 14
15
X5
2017 18 19
PE
24 V
0 V