1. Description
1.3 Device models - versions and part nos.
1.3 Device models - versions and part nos.
1.3.1 Basic features
All XV are equipped with:
- the Windows Embedded Compact 7 pro operating system
- an industrial capacitive multitouch display, PCT
- an SD/SDHC memory card slot.
Every HMI panel comes with the following integrated interfaces as standard:
l One Ethernet port (10/100 Mbit/s) for use as a communication or field bus interface
l One USB 2.0 host port for memory and other accessories, full power (500 mA)
l One USB device 2.0,
l One standard RS-232 (COM1) port for communicating with PLCs or devices
l One standard RS-485 (COM2) port for communicating with PLCs or devices
l One standard CAN interface for the CANopen protocol, J1939 protocol, etc.
1.3.2 Device variants
One of the main differences between the various device models is the specific mount-
ing method that must be used when installing the devices in an enclosure.
l Front mounting, in which the device is inserted into the enclosure from the front
l Rear (panel) mounting, which provides a flush alignment with the enclosure's sur-
face
1.3.3 Optional features
The following individual options are available in order to ensure that the unit will best
meet the needs of the application at hand:
l Two widescreen display sizes: 7.0" or 10.1" widescreen
l Device bundles with visualization software and/or control software licenses.
Additional integrated interfaces
l Second Ethernet port (10/100 Mbit/s) for use as a communication interface
l PROFIBUS-DP, universal field bus interface for all typical protocols
l SWD for an efficient use of SmartWire-DT
®
technology and its comprehensive fea-
tures
XV30012/15 MN048017 ENwww.eaton.eu
17
To Next Page
Loading...
