Eaton XV300 Series - Installation, Maintenance, and Disposal; Prerequisites for Proper Operation

2. Safety instructions
2.2 Mandatory requirements, personnel requirements
Make sure that every person who will be working with the XV300, regardless of the life-
cycle stage involved, has read and understood the relevant parts of the documentation
for the XV300.
Additional parts of the documentation for the XV300, including the installation instruc-
tions, can be found at the Eaton Download Center - Documentation page on the Internet.
http://www.eaton.eu/doc
WARNING
Incompleteoperatormanualcopies
Workingwithindividualpagestakenoutfromtheoperatormanualmay
leadtobodilyinjuryandpropertydamageduetomissingsafetyinform-
ation.
Always work with the full document.
2.2.4 Installation, maintenance, and disposal
Make sure that the XV300 is connected, installed, serviced, and disposed of pro-
fessionally and in line with all relevant standards and safety rules.
CAUTION
Installation, electrotechnical expertise
Important!
Disposeofrecyclablesasrequiredbyyourlocalrecyclingregulations.
An XV300 panel which is no longer being used must be professionally disposed of as
per local standards or returned to the manufacturer or relevant sales department.
2.2.5 Prerequisites for proper operation
In order for the device to be able to meet the contractually stipulated terms, the fol-
lowing must be observed:
l Only qualified personnel should be allowed to work with the XV300.
l The personnel working with the XV300 must have read the manual and must follow
all the instructions in it.
l The required ambient conditions must be met. → Section "General data ", page 75
l Maintenance work must be carried out correctly.
Make sure to read the "Legal Disclaimer", page 9.
XV30012/15 MN048017 ENwww.eaton.eu
25