7. Maintenance
7.3 Storage, transport and disposal
7.3 Storage, transport and disposal
7.3.1 Storage and transport
CAUTION
UVLIGHT
PlasticswillbecomebrittlewhenexposedtoUVlight.Thisartificialaging
willreducetheXV300unit'slifespan.ProtecttheXV300unitfromdirectsun-
lightandothersourcesofUVradiation.
CAUTION
SHORT-CIRCUITHAZARD
IftheXV300TouchPanelisorhasbeenexposedtoenvironmentalfluc-
tuations(ambienttemperature,airhumidity),condensationmayformonor
insideit.Aslongasthiscondensationispresent,therewillbeashort-circuit
hazard.
DonotswitchontheXV300TouchPanelwhenithascondensationinoron
it.
IftheXV300hascondensationinoronit,orifthepanelhasbeenexposed
toenvironmentalfluctuations,letthepanelsettleintotheexistingambient
temperaturebeforeswitchingiton.DonotexposetheXV300TouchPanel
todirectthermalradiationfromheatingappliances.
The ambient conditions must be met when transporting and storing the XV300.
The ambient air temperature during operation must not exceed the maximum limit
value:
Ambient climatic conditions
Air pressure (in operation)
795 - 1080 hPa
max. 2000 m a. NHN (standard elevation zero)
temperature
Operation
± 0 – +50 °C (+32 – +122 °F)
Storage / Transport
-20 – + 60 °C (-4 – +140 °F)
Relative humidity
Relative humidity 10 - 95 %
Condensation
non-condensing
Beforecommissioning
Ifstoring/transportingthedeviceincoldweatherconditionsorinsucha
waythatitwillbeexposedtoextremedifferencesintemperature,make
surethatnocondensationformsonorinsidethedevice.
IfthereiscondensationinorontheHMIpanel,donotswitchonthe
deviceuntilitiscompletelydry.
Use the original packaging to ship the device.
The XV300 is sturdily built, but the components inside it are sensitive to excessively
strong vibrations and/or mechanical shock.
Accordingly, make sure to protect the XV300 from mechanical loads that exceed the
scope of the unit's intended use.
XV30012/15 MN048017 ENwww.eaton.eu
67