EasyManua.ls Logo

EBA 2326 S/C - Page 44

EBA 2326 S/C
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 44 -
EBA 2326 • EBA 2331 • EBA 2339 • EBA 3140 • EBA 2026-2 • EBA 5131 • EBA 5141
• Technische Information • Technical information •
• Information technique • Technische gegevens •
• Informazioni Tecniche • Información técnica •
• Teknisk information •
DE Diese Maschine ist GS-geprüft und
ent spricht den EG-Richtlinien 2014/35EU
und 2014/30/EU.
Geräuschinformation:
Unter dem nach ISO 7779 zugelassenen
Wert von < 70 db (A) (L
PA
).
Genauer Wert im Leerlauf, L
PA
und L
WAd
(garantierter A-bewerteter Schalllei-
stungspegel) siehe Seite 46.
Die spezischen technischen Daten ent-
nehmen Sie bitte den Angaben auf dem
Typenschild der Maschine.
Für die Inanspruchnahme einer Garan-
tieleistung muss das Gerät durch das
Typenschild zu identizieren sein.
Technische Änderungen vorbehalten.
EN This machine is approved by independent
safety laboratories and is in compliance
with the EC-regulations 2014/35/EU and
2014/30/EU.
Sound level information:
The sound level at the work place is less
than the ISO 7779 standard’s maximum
permissible level of < 70 db (A) (L
PA
).
Exact value in iding running, L
PA
and L
WAd
(guaranteed A-rated sound power level)
See page 46 for the exact level.
The exact technical specications can
be found on the technical specications
sticker on the machine.
To claim under guarantee, the machine
must still carry its original identication
label.
Subject to alterations without notice.
FR Cette machine a subi les contrôles de
sécurité et correspond aux
directives européennes 2014/35/EU et
2014/30/EU.
Niveau sonore: Au poste de travail, le
niveau sonore est inférieur aux valeurs
maximales autorisées par la norme DIN
ISO 7779 < 70 décibels. Niveau sonore
précis : voir page 46.
Les indications techniques se retrouvent
sur la plaque signalitique de la machine.
Pour bénécier de la garantie, la machine
doit pouvoir être identifée par sa plaque
signalétique.
Sous réserve de modications
techniques.