EBL EBL-C802 - How to Use the Battery Charger

HOW TO USE
This battery charger is used for AA/AAA Ni-MH Ni-CD batteries
and 9V batteries.
AA/AAA batteries must be charged in pairs and installed into 1,2
slots or 3,4 slots.
When power on the charger, the LED indicate light will flash in red
and green one time and then off.
Charging AA/AAA/9V batteries, the LED indicate light will be red,
and then turns to green when fully charged.
The absolute 0V battery can not be charged.
Can not charge alkaline or carbon batteries.
1.
2.
3.
4.
5.
6.
USE STEPS
04
Charging
indicating
mode
1. Power on and no battery inserted-First red light,
then green light, then off the lights
2. Charging-Red Light
3. Green-Fully Charged