HOW TO USE
Place the battery inside the charger correctly, making sure the +/-
pole of the battery is corresponding to the +/- pole of the charger,
otherwise the battery won't be charged or will burn out the charger.
Connect the charger to the power with micro USB cable and use
5V/2A adapter.
The charger could charge 1-8pcs 1.5V Lithium-ion AA/AAA
rechargeable batteries.
1.
2.
3.
USE STEPS
04
Charger status
Power ON
Charging
The battery is full
Error
Instructions
When the power is connected, the red light is on
first, then the green light is on, and finally the light
is off.
Disposable batteries, Ni-MH Ni-Cd batteries,
Lithium batteries, automatically stop charging and
flashing red light.
When the battery is fully charged, it will
automatically stop charging and the green light
will be on.
When the battery is put in, it enters the charging
state, and the red light is always on.
To Next Page
Loading...
